.png)
Track Pan, Center Pan, w/ Grates & Stormwater Feature. Capture hazardous spills from railroad tanker cars. Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. The modular design can be used for spill control for everything from small drips during maintenance to catastrophic spills from tanker cars.
Ultra-Track Pan, Center Pan, w/ Grates & Stormwater Feature
SKU: 9564
$910.00Price
- Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
- Long work life - estimated to perform 20-30 years.
- Modular design - center and side pans are 53.5" long; railroad spill containment areas can be easily assembled to any length desired
- All-polyethylene construction - rugged track pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F.
- Sealed system - polyethylene (LLDPE) gaskets keep spills from falling between the rails and pans.
- Below grade piping - all center and side track pans are molded with pipe fitting locators at their lowest point. Below grade piping can be installed to channel large spills to oil/water separators, holding ponds, etc.
- Low maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
- Low cost installation — lightweight track pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
- Slip resistant surfaces - pans and grates have been designed with safety in mind. All top surfaces resist slips when wet or oily.
- 2 bulkhead fittings, 4 gaskets and 2 grates
- 53.5 x 53.5 x 6 (1358.9 x 1358.9 x 152.4)
- 18 (68.1)
- 112 (50.8)
- Easy Installation: Lightweight, smaller pans are very easy to move around and install without heavy equipment
- Chemical Resistance: Polyethylene construction has excellent chemical resistance – better than metal and other materials.
- Patented Gasket System: Seals against the rail eliminating a potentially large leak point.
- Grating is Included: All Ultra-Track Pans come with grates as part of the design/integrity for walking on or setting up drive over points. Personnel do not have to walk in spilled product in pans due to grating in every pan, reducing liability.
- Modular: If something gets damaged, only a small section will need to be replaced.
- Patented Horizontal Flow: Flow-through channels and bulkhead fittings allow spills to travel from pan to pan. Track pans, of all kinds, have limited capacity, so routing a spill sideways and then through below-grade piping is very critical.
- Multiple Drain Capacity: Ultra-Track Pans are designed so they can accommodate multiple drains in as many pans sections as desired.
- Crude Oil Applications: Viton gaskets available for installations in crude oil loading/off-loading areas.
- Longevity: Estimated 20-30 year work life.
- Ultra-Track Pan Rebar Fasteners With Protective Caps (Part #9584)
- Ultra-Track Pan, 3" Drain Fitting 3" Diameter Drain Fitting for Below Grade Piping (Part #9559)
- Ultra-Track Pan Grate Only For Center Pan - Left Grate (Part #9571)
- Ultra-Track Pan Grate Only For Center Pan - Right Grate (Part #9572)
- Ultra-Spill Deck Plus Grate Only (Part #9573)